Rockwell-automation 56RF RFID System User Manual Manual de usuario descargar pdf (Pagina 146)

146 Rockwell Automation Publication 56RF-UM001A-EN-P - October 2011

Appendix B CIP Information

Instance 1 is the first input (Pt00), if the RFID interface supports two inputs,

then Pt01 would be instance 2.

The return value in CIP_Data[0] will be either 0 (Input OFF) or 1 (Input ON).

To obtain the Input Filter OffOn value of an input point, configure a CIP

message as shown below:

Instance 1 is the first input (Pt00), if the RFID interface supports two inputs,

then Pt01 would be instance 2.

The return value will contain the filter time in milliseconds.

Discrete Output Point

Object Class Code 0x0009

The following class attributes are supported:

Two instances of the Discrete Output Point Object are supported. All instances

contain the following attributes.

Attribute ID Access Rule Name Data Type Value

1 Get Revision 0xC1 1

2 Get Max Instance UINT 4 or 10

Attribute

Access Rule Name Data Type Value

3 Get Value BOOL 0 = OFF, 1 = ON

5 Get/Set FaultMode BOOL 0 = Use Fault Value

1 = Hold Last State

6 Get/Set FaultValue BOOL 0 = OFF

0 = ON

7 Get/Set ProgMode BOOL 0 = Use Program Value

1 = Hold Last State

8 Get/Set ProgValue BOOL 0 = OFF

1 = ON

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 155 156

Sin comentarios

Rockwell-automation 56RF RFID System User Manual Manual de usuario Pagina 146