Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Manual de usuario descargar pdf (Pagina 19)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 19

Installation Chapter 2

Installation Guidelines

Follow these guidelines to make sure your computer provides safe and reliable service:

• The installation site must have sufficient power.

• In dry environments, static charges can build up easily. Proper grounding

of the computer helps to reduce static discharges, which can cause shock

and damage electronic components.

• The enclosure must allow sufficient space around air inlets and outlets to

provide the circulation necessary for cooling. See Mounting Clearance

Requirements on page 20 for further information. Never allow air passages

to become obstructed.

• The ambient air temperature must not exceed the maximum operating

temperature specified in Tab l e 4 on p a g e 48

. Consider a user-supplied fan,

heat exchanger, or air conditioner for heat generated by other devices in

the enclosure.

• The humidity of the ambient air must not exceed limits specified in

Tab le 4 o n pa g e 48

and must avoid condensation.

•

The enclosure or cover must remain in place at all times during operation. The

cover provides protection against high voltages inside the computer and

inhibits radio-frequency emissions that can interfere with other equipment.

•

When mounted, the computer cannot be tilted more than 30° from vertical.

ATTENTION: To maintain an electrically safe installation, AC powered

computers must be plugged into a grounded outlet.

TIP

Hot air rises. The temperature at the top of the enclosure is often

higher than the temperature in other parts of the enclosure, especially

if air is not circulating.

IMPORTANT

The computer can operate at a range of extremes. However, the life

span of any electronic device is shortened if you continuously operate

the computer at its highest rated temperature.

Acceptable Unacceptable

≤30°

from Vertical

≤30°

from Vertical

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Comentarios a estos manuales

Sin comentarios