Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Manual de usuario descargar pdf (Pagina 46)

46 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014

Chapter 4 Component Replacement

5. Insert the new battery with the positive polarity (+ side) facing up, and

make sure that it is seated completely.

6. Reinstall the computer cover as detailed in Reinstall the Cover

on page 36.

7. Follow the steps for Post-configuration

on page 35.

8. During POST, press F2 to enter the BIOS setup and reconfigure settings.

Backlight Assembly Disposal

IMPORTANT

Replacing the battery results in all BIOS settings returning to their

default settings. BIOS settings other than default must be reconfigured

after replacing the battery.

This computer contains a sealed lithium battery that may need to be

replaced during the life of the computer.

At the end of its life, the battery contained in this computer should be

collected separately from any unsorted municipal waste.

ATTENTION: The backlight assembly in this computer can contain mercury. At

the end of its life, this equipment should be collected separately from any

unsorted municipal waste.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 67 68

Comentarios a estos manuales

Sin comentarios