Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Manual de usuario descargar pdf (Pagina 43)

Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014 43

Component Replacement Chapter 4

13. Secure the new add-in board in place.

a. Extend the clamp to the desired length (L).

b. Tighten the hold-down clamp screw (M).

c. Bend the clamp against the add-in card to secure it in place (N).

d. Lock the clamp screw on the hold-down bar (O).

14. Refer to any installation instructions that came with the add-in card to

verify that all installation steps are followed.

15. Follow the steps for Post-configuration

on page 35.

Replace or Add

Memory Modules

The motherboard of the computers has two dual-channel DDR-II DIMM slots

that support up to 2 GB per slot with 4 GB maximum system memory.

Figure 9 - Memory Module Slots and Module Alignment

A

L

N

M

O

Retaining Latch

Keyed Surface

of DIMM Slot

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Comentarios a estos manuales

Sin comentarios