Rockwell-automation 6180P-xxxx Integrated Display Computers with Keypa Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
24 Rockwell Automation Publication 6180P-UM001C-EN-P - February 2014
Chapter 2 Installation
11. Repeat this process at least three times until the clips are properly torqued,
making sure the gasket is compressed uniformly against the panel.
Connect Peripherals
The following illustration shows the I/O port panel of the computers. Peripheral
components compatible to each port are inside the callout figures.
ATTENTION: Tighten the mounting clips to the specified torque to
provide a proper seal and prevent damage to the product. Rockwell
Automation assumes no responsibility for water or chemical damage to
the computer or other equipment within the enclosure because of
improper installation.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Comentarios a estos manuales

Sin comentarios