Rockwell-automation 8520-9API 9/Series OCI API Developer's Guide Manual de usuario descargar pdf (Pagina 125)

5–14 OCI Data Server CNC Commands

Publication 8520-6.6 - August 1999

TRANSFER_AXISCAL_TO_PORTB (no argument)

Use this command to back up the current axis calibration data to a

device connected to the control’s port B

. This will back up axis

calibration data currently in RAM. This may or may not be the same

axis calibration data stored in the control’s backup memory.

For example:

[TRANSFER_AXISCAL_TO_PORTB]

would write the axis calibration data to the device connected to the

control’s port B. This backup file is not in a man–readable format.

Use the command TRANSFER_ AXISCAL_FROM_PORTB to

retrieve axis calibration data configuration from a peripheral device.

Important: This command does not apply to the 9/PC CNC.

ACTIVATE_RIO_PASSTHROUGH (no argument)

Use this command to enable the remote I/O passthrough feature.

For example:

[ACTIVATE_RIO_PASSTHROUGH]

Important: This command does not apply to the 9/PC CNC.

AUX_COM_ABORT_COMMAND (no argument)

This command is used only for systems with a data highway module.

Use this command to abort data highway module communications in

progress.

For example:

AUX_COM_ABORT_COMMAND

aborts the the current DH transfer.

Important: This command does not apply to the 9/PC CNC.

Communications

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 262 263

Sin comentarios

Rockwell-automation 8520-9API 9/Series OCI API Developer's Guide Manual de usuario Pagina 125