Rockwell-automation Ethernet Design Considerations Reference Manual Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
Rockwell Automation Publication ENET-RM002C-EN-P - May 2013 13
Chapter 1
EtherNet/IP Overview
The EtherNet/IP protocol is a multi-discipline, control and information
platform for use in industrial environments and time-critical applications. The
EtherNet/IP network uses standard Ethernet and TCP/IP technologies and an
open, application-layer protocol called the Common Industrial Protocol (CIP).
The open, application-layer protocol makes interoperability and
interchangeability of industrial automation and control devices on the
EtherNet/IP network a reality for automation and real-time control applications.
The EtherNet/IP protocol follows these standards:
IEEE 802.3—Standard Ethernet, Precision Time Protocol (IEEE-1588)
IETF—Internet Engineering Task Force, standard Internet Protocol (IP)
IEC—International Electrotechnical Commission
ODVA—Open DeviceNet Vendor Association, Common Industrial
Protocol (CIP)
Topic Page
Network Protocols 14
Configuration Requirements 15
EtherNet/IP Modules in a Control System 19
Bridge across Networks 20
Application
Presentation
Session
Transport
Network
Link
Physical
CIP
Control and Information
Protocol
Ethernet
MAC
Ethernet
Physical
UDP TCP
IP
IP-Multicast
EN50170
Control International
and
IF C 61158 Standard
Request for Comments
IETF
UDP/TCP/IP
IEEE 802.3
OPEN
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 105 106

Comentarios a estos manuales

Sin comentarios