Rockwell-automation FactoryTalk Report Expert User Guide Manual de usuario descargar pdf (Pagina 125)

Editing Event and Production Data Chapter 8

Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014 125

To delete an event:

1. Select the Edit Events operation and the desired parameter

set, and then click View Data.

TIP

Alternatively, select the Enter Data Manually operation and

the desired parameter set, and then click View Data. In the

Select Area and Shift Details panel, click Events.

The data is displayed in the Event list panel.

2. Under Actions, click More > Delete in the row with the event

that you want to delete.

NOTE

The Delete option is not displayed if the event configuration

restrictions are not fulfilled.

3. Click OK to confirm that you want to delete the selected

event.

You can edit the following production data:

• The number of good and scrap parts (page 125).

• The ID of the part produced (page 126).

• The ideal cycle time (page 127).

• The values of user-defined summarization fields (page 127).

To edit the number of good and scrap parts:

1. Select the Edit Production Data operation and the desired

parameter set, and then click View Data.

TIP

Alternatively, select the Enter Data Manually operation and

the desired parameter set, and then click View Data. Make sure

that the Production option is selected.

The data is displayed in the Production data list panel.

2. Make sure the Lock part counts at their current times...

check box under Options is cleared. Otherwise, you will not

be able to edit the number of good and scrap parts.

Editing Production Data

Editing the Number of Good

and Scrap Parts

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 181 182

Sin comentarios

Rockwell-automation FactoryTalk Report Expert User Guide Manual de usuario Pagina 125