Rockwell-automation FactoryTalk Report Expert User Guide Manual de usuario descargar pdf (Pagina 126)

Chapter 8 Editing Event and Production Data

126 Rockwell Automation Publication RPTEXP-UM001H-EN-P-June 2014

3. Click Edit in the row in which you want to modify the

number of good and scrap parts.

The Good Parts and Scrap Parts fields become editable.

4. Complete or modify the Good Parts and Scrap Parts fields.

5. Click Save to save the modified data.

There are restrictions related to editing the ID of the produced

parts. You can change the part ID provided that the activity area

configuration fulfills the following conditions:

• Part Id Type is set to the following:

• Use a single Part Id.

• Monitor an Unscheduled data point for Part Id.

To edit the ID of the produced part:

1. Select the Edit Production Data operation and the desired

parameter set, and then click View Data.

TIP

Alternatively, select the Enter Data Manually operation and

the desired parameter set, and then click View Data. Make sure

that the Production option is selected.

The data is displayed in the Production data list panel.

2. Click Edit in the row in which you want to modify the ID of

the part.

The Part Id field becomes editable.

3. Complete or modify the Part Id field.

4. Click Save to save the modified data.

Editing the Part Id

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 181 182

Sin comentarios

Rockwell-automation FactoryTalk Report Expert User Guide Manual de usuario Pagina 126