Rockwell Automation 1203-SSS Manual de usuario descargar pdf (Pagina 12)

Publication 1203-5.14 – September 1998

1-2 Overview

What Hardware Is Included?

Figure 1.2 and the table below illustrate and list the main parts of the

1203-SSS converter:

Figure 1.2

Parts of the Converter

Overview of Setting Up the

1203-SSS Converter

To set up the 1203-SSS converter, you must perform the following

tasks:

1. Install the converter. Refer to Chapter 2, Installation.

2. If desired, configure the converter’s parameters. Refer to

Chapter 3, Configuring the 1203-SSS Converter.

Required Tools and Equipment

To install and configure a 1203-SSS converter, you need the following

equipment:

• 1203-SSS converter.

• Appropriate cables for SCANport and serial connections. Refer to

Chapter 2, Installation, for more information.

• A PC running a Windows™ terminal emulation program (e.g.,

HyperTerminal) or DriveExplorer™, or a VT100-compatible

terminal.

Number Part Description

1 RS-232 Serial Port Provides a connector for a 1203-SFC serial cable.

2 SCANport Connection Provides a standard SCANport 8-pin circular mini-DIN connector for the SCANport cable.

3 RX LED Illuminates when data is sent from the host computer to the 1203-SSS.

4 TX LED Illuminates when data is sent from the 1203-SSS to the host computer.

Not

Shown

1202-C10 SCANport

Cable

SCANport cable (1 m) with male-to-male connections. (Included with the converter.)

Not

Shown

1203-SFC Serial

Cable

Serial cable (2 m) with a locking low profile connector to connect to the converter and a 9-pin

sub-miniature D female connector to connect to the personal computer. (Included with the

converter.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Sin comentarios

Rockwell Automation 1203-SSS Manual de usuario Pagina 12