Rockwell Automation 1203-SSS Manual de usuario descargar pdf (Pagina 18)

Publication 1203-5.14 – September 1998

3-2 Configuring the 1203-SSS Converter

connection between the converter and either a PC running terminal

emulation software or a terminal. Refer to the following table:

Using a PC Running Terminal Emulation Software

A variety of terminal emulation programs can be used to establish a

serial connection to the converter. The following instructions describe

how to establish the initial serial connection to the converter using a

PC running Windows 95 HyperTerminal software. Future connections

to the converter can use this same configuration by clicking the icon

added to the initial screen when the configuration is saved.

Important: If you are not using Windows 95 HyperTerminal, steps to

establish a serial connection may vary from the following steps.

1. Install the 1203-SSS converter by connecting it to the personal

computer and SCANport product. Refer to Chapter 2,

Installation, for more information.

2. In Windows, click Start, select Programs, Accessories, and then

HyperTerminal. A HyperTerminal dialog box appears.

Figure 3.1

Example HyperTerminal Dialog Box

If Using: Refer to:

PC running terminal emulation software page 3-2 in this manual

VT100-compatible terminal page 3-6 in this manual

DriveExplorer Software

DriveExplorer User Manual

, Publication

9303-5.0

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Sin comentarios

Rockwell Automation 1203-SSS Manual de usuario Pagina 18