Rockwell Automation 1203-SSS Manual de usuario descargar pdf (Pagina 25)

Publication 1203-5.14 – September 1998

Configuring the 1203-SSS Converter 3-9

Displaying and Clearing the Event

Queue in the 1203-SSS Converter

If an unexpected problem occurs with the converter, you may need to

check the event queue to view events that have happened in the

converter. Follow these instructions:

1. Establish a serial connection to access the converter’s software.

Refer to the “Establishing a Serial Connection with the 1203-SSS

Converter” section earlier in this chapter.

2. Press 2 to select 2> Display event queue. The event queue

appears.

Figure 3.9

Example Event Queue

3. Scroll through the list of Event Queue parameters by pressing the

Up Arrow or Down Arrow key.

4. If desired, clear the event queue in the adapter by setting Clr

Event Queue (1) to Enable and pressing the Enter key.

5. Press the Escape key to return to the main menu.

Number Name Description

1 Clr Event Queue Enable = Clears the event queue.

Ready = Leaves the event queue as is.

2 – 7 Event Queue 1 – Event Queue 6 Event in the event queue. Most recent event is listed in Event Queue 1.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Sin comentarios

Rockwell Automation 1203-SSS Manual de usuario Pagina 25