Rockwell Automation 1203-SSS Manual de usuario descargar pdf (Pagina 22)

Publication 1203-5.14 – September 1998

3-6 Configuring the 1203-SSS Converter

Figure 3.6

Main Menu

You now have access to the converter’s software. Refer to the

“Navigation Techniques” section on page 3-7 for more information

on using it.

Using a VT100-Compatible Terminal

Important: If you are using a PC, skip this section.

The following instructions describe how to establish a serial

connection to the converter using a VT100-compatible terminal.

1. Install the 1203-SSS converter by connecting it to the VT100-

compatible terminal and SCANport product. Refer to Chapter 2,

Installation, for more information.

2. Start your terminal.

3. Select the following settings:

• 9600 in the Bits per second field.

If you have previously set the converter’s Serial Port Rate (3)

parameter to enable 19200 bps, set the bps to 19200.

• 8 in the Data bits field.

• None in the Parity field.

• 1 in the Stop bits field.

• None in the Flow Control field.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

Rockwell Automation 1203-SSS Manual de usuario Pagina 22