Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual de usuario descargar pdf (Pagina 46)

36 Rockwell Automation Publication 1734-UM018B-EN-P - October 2013

Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software

3. Select your adapter from the list and click Create.

The New Module dialog opens.

4. Select the General Tab and enter the module details, noting that we used

the following values.

5. Click Change...

The Module Definition dialog opens.

6. Choose values for Series, Revision, Electronic Keying, Connection, and

Chassis Size, noting that we used the following values:

Name POINT IO Adapter

IP Address 10.88.70.2

IMPORTANT

Note that the slot field is disabled because the slot is automatically 0

for the 1734-AENT/B adapter.

Series B

Connection None

Chassis Size 5

Electronic Keying Compatible Module

Revision 4.3

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 117 118

Sin comentarios

Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual de usuario Pagina 46