Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual de usuario descargar pdf (Pagina 66)

56 Rockwell Automation Publication 1734-UM018B-EN-P - October 2013

Chapter 5 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software

5. Enter values for Name, IP Address, and Slot, noting that we used the

following values:

Note the module definition properties on the bottom left of the New

Module dialog. You have the option to change these properties by clicking

the Change button. Some of the properties cannot be modified while

pending edits exists.

To change the default module properties,

6. Click Change...

The Module Definition dialog opens.

7. Enter or select values for Series, Revision, Electronic Keying, Rack

Connection, and Time Sync Connection, noting that we used the

following values:

8. Click OK to accept the configuration.

The module appears indented under under the I/O Configuration folder.

Name Local_ENBT

IP Address 10.88.70.4

Slot 3

Series A

Revision 5.1

Electronic Keying Compatible Module

Rack Connection None

Time Sync Connection None

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 117 118

Sin comentarios

Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual de usuario Pagina 66