Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario descargar pdf (Pagina 120)

Publication 1761-UM006E-EN-P - August 2005

8-28 Connecting CompactLogix Controllers on Ethernet

1. From the Logic pull down menu, select “Map PLC/SLC

Messages”. Your mapped table for your Logix program should

look like the following:

Figure 8.30 File Mapping for the ControlLogix Controller in RSLogix 5000

2. Save your program.

3. From the RSLogix 500 programming software, you should now

be able to download your SLC 5/05 program. Then, from the

RSLogix 5000 software you should now be able to download

your ControlLogix controller program.

4. Once all programs are downloaded to their respective

controllers, place each controller into the RUN mode and a MSG

from each controller will be sent to each of the other controllers.

Each controller will only send one MSG at any given time. Go

online with the CompactLogix, SLC 5/05, and ControlLogix

controllers to verify the successful completion of their messages.

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 143 144

Sin comentarios

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario Pagina 120