Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario descargar pdf (Pagina 46)

Publication 1761-UM006E-EN-P - August 2005

4-6 ENI/ENIW Configuration (Nodes 241 to 254)

Reset

Use the Reset screen to issue reset commands and to set the type of

behavior that will occur at reset. The reset behavior options are

described on page 4-19.

For configurations uploaded from an ENI, the reset screen also

displays information, such as the ENI/ENIW Ethernet hardware

address and ENI/ENIW firmware revision.

Use the Configuration Utility Over RS-232

TIP

When using the ENI/ENIW Configuration Utility, be

sure to use a 1761-CBL-PM02 series C cable

between the ENI/ENIW and the computer.

Also, make sure RSLinx is not running a driver that

is using the COM port that you plan to use for the

ENI/ENIW Configuration Utility.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 143 144

Sin comentarios

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario Pagina 46