Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario descargar pdf (Pagina 17)

Publication 1761-UM006E-EN-P - August 2005

Product Overview 1-5

Default Settings

The ENI/ENIW has the following default settings:

IMPORTANT

The IP addresses in any of the examples in this

manual were arbitrarily assigned and should only be

used on an isolated Ethernet network. Contact your

system administrator for unique IP addresses if you

are connecting your Ethernet devices to your

employer’s Ethernet network.

Table 1.4 RS-232 Settings

Setting Default Other Options

Baud Rate Autobaud see table 4.2

Handshaking (hardware, software) none none

Data Bits 8 none

Stop Bits 1 none

Parity none none

Table 1.5 DF1 Settings

Setting Default Other Options

Duplicate Message Detection Enabled none

Error Detection Auto-detect (for

Autobaud)

Auto-detect when

Autobaud is true,

otherwise CRC

Embedded Response Operation

Disabled

(1)

(1) Connected controllers should be configured for Embedded Responses Disabled or Auto-detect.

none

DLE ACK Timeout 1 second none

DLE NAK Receive 3 NAK retries none

DLE ENQ for Response 3 ENQs retries none

DF1 Node Address Don’t Care

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 143 144

Sin comentarios

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario Pagina 17