Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario descargar pdf (Pagina 41)

1 Publication 1761-UM006E-EN-P - August 2005

Chapter

ENI/ENIW Configuration (Nodes 241 to 254)

This chapter describes configuration methods and parameters. It is

arranged as follows:

• Configuration Methods

• ENI/ENIW Configuration Utility

• Controller Messaging

• ENI/ENIW Configuration Parameters

• Configuring ENI/ENIW Data Parameters

• Configuring ENI/ENIW String Parameters

Configuration Methods

The ENI/ENIW’s IP information can be entered using either:

• the ENI/ENIW Configuration Utility via the RS-232 port

• the ENI/ENIW Configuration Utility via Ethernet, using Com Port

Redirector software (for series D only)

• a write message from the Allen-Bradley controller to node

address 250 via the RS-232 port

• a BOOTP server over Ethernet (BOOTP configuration is

described in Appendix B of this manual)

• a DHCP server over Ethernet (once configured for DHCP)

ENI/ENIW Configuration

Utility

The ENI/ENIW Configuration Utility is free software designed for

configuring the ENI/ENIW. It is available for download from the

Downloads page of any MicroLogix controller at

www.ab.com/micrologix.

The Com Port Redirector software, which allows ENI/ENIW

configuration over Ethernet, is also available for download from

www.ab.com/micrologix.

This section provides information on how to:

• Make configuration selections using the Configuration Utility.

• Use the Configuration Utility over RS-232.

• Use the Configuration Utility over Ethernet with the Com Port

Redirector software.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 143 144

Sin comentarios

Rockwell-automation 1761-NET-ENIW MicroLogix Ethernet Interface (ENI) Manual de usuario Pagina 41