Rockwell-automation 1775-KA PLC-3 Communication Adapter Module User Ma Manual de usuario Pagina 207

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 239
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 206
Remote Error Codes Received from the
1773-KA Module
Appendix B
B15
Error
Code Meaning
It
indicates that either a very heavy traf
fic load is being
presented to the remote station, or that the dynamic memory of
the remote station is corrupted. If the problem clears up after
cycling power and does not recur
, the cause may be RAM or
CPU failures triggered by heat or noise. If the problem recurs
repeatedly the probable cause is too many messages.
If the remote station has a 1773–KA module, the remote error codes will
have the meanings listed in the table below:
Error
Code Meaning
81 Illegal
command. This error is sent from the 1773-KA if the
command message was incorrect in any of the following:
command code, subcommand code, and size of the command or
the requested reply size. This error results in the setting of the
remote error bit for the associated rung.
82
Controller is already allocated to a RS-232-C device or to a
PLC-4 Microtrol Programmer orExtended PLC-4 Microtrol
function is in progress
83
Some condition exists with a controller on the loop: Either the
cable between the 1773-KA module and a controller is
unplugged or the addressed controller is not on the loop. Either
results in setting the remote error bit for the associated rung.
84
Execution of a message at the 1773-KA module was aborted
because of a hard communication error on the cable between the
module and a controller on the loop. This error results in the
setting of the remote error bit for the associated rung.
One of the following may be true:
Packet lost on ring or
T
wo or more controllers on the loop have the same ID number
PLC-4 Microtrol must be allocated*
Undefined function*
Function not available this mode*
Controller number is invalid*
Invalid Parameters
Remote Error Codes Received
from the 1773-KA Module
Vista de pagina 206
1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 238 239

Comentarios a estos manuales

Sin comentarios