Rockwell-automation 20-750-DNET PowerFlex DeviceNet Option Module Manual de usuario descargar pdf (Pagina 45)

Rockwell Automation Publication 750COM-UM002B-EN-P - October 2012 45

Configuring the I/O Chapter 4

12. Edit the following:

13. Click Apply.

14. Click the Scanlist tab to begin the drive I/O configuration.

The Available Devices left box shows devices that are presently on the

DeviceNet network but are not yet configured. The Scanlist right box

shows devices that are presently on the DeviceNet network and are

configured.

15. For this example, uncheck Automap on Add.

Box Setting

Interscan Delay Sets the scanner time delay between consecutive I/O scans on the network. For this

example, we recommend using the default setting of 10 milliseconds.

TIP: When numerous drives are on the network and the drives are faulting on a Comm

Loss, increasing this value may help.

Foreground… Sets the ratio of foreground to background polls. For this example, we recommend using

the default setting of 2.

Slot Sets the slot location in which the scanner is installed. For this example, Slot 3 is

selected.

TIP

The Automap on Add box is checked by default and allows RSNetWorx

for DeviceNet software to automatically map the drive I/O into the

scanner in the next available registers. The mapping is based on the

minimum I/O requirements (8 bytes for input and 8 bytes for output)

that the scanner obtains from the drive EDS file.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 143 144

Sin comentarios

Rockwell-automation 20-750-DNET PowerFlex DeviceNet Option Module Manual de usuario Pagina 45