Rockwell-automation 20-750-PBUS Profibus DPV1 Option Module Manual de usuario descargar pdf (Pagina 30)

30 Rockwell Automation Publication 750COM-UM004B-EN-P - September 2012

Chapter 3 Configuring the Option Module

Using the PowerFlex 20-

HIM-A6 or 20-HIM-C6S HIM

to Access Parameters

If your drive has an enhanced PowerFlex 20-HIM-A6 or 20-HIM-C6S HIM, it

can be used to access parameters in the option module.

1. Display the Status screen, which is shown on HIM powerup.

2. Use the or key to scroll to the Port in which the option

module is installed.

3. Press the PAR# soft key to display the Jump to Param # entry pop-up box.

4. Use the numeric keys to enter the desired parameter number, or use the ▲

or ▼ soft key to scroll to the desired parameter number.

For details on viewing and editing parameters, see the PowerFlex 20-HIM-A6/-

C6S HIM (Human Interface Module) User Manual, publication 20HIM-

UM001.

Setting the Node Address

If the option module Node Address switches (Figure 1) are set to ‘00’ (Program),

the value of Device Parameter 05 - [Net Addr Cfg] determines the node address.

When the Node Address switches are in any other combination of positions, the

switches determine the node address.

1. Set the value of Device Parameter 05 - [Net Addr Cfg] to a unique node

address.

2. Reset the option module; see Resetting the Option Module

on page 34.

Setting a Master-Slave

Hierarchy (Optional)

This procedure is only required if Datalinks are used to write or read data of the

drive or its connected peripherals. A hierarchy determines the type of device with

which the option module exchanges data. In a Master-Slave hierarchy, the option

module exchanges data with a Profibus master, such as a ProSoft MVI56-

PDPMV1 Profibus DP scanner. This scanner integrates, as a third party module,

in a ControlLogix controller backplane to allow Profibus DP communications.

Enable Datalinks To Write Data

The controller output image (controller outputs-to-drive) can have 0 to 16

additional 32-bit parameters (Datalinks). They are configured using Host

ESC



ENTER

Stopped

0.00 Hz

AUTO

Edit Net Addr Cfg

0 << 126

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 95 96

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 20-750-PBUS Profibus DPV1 Option Module Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 20-750-PBUS Profibus DPV1 Option Module