Rockwell-automation 20C PowerFlex 700H Drives Programming Manual de usuario Pagina 101
- Pagina / 116
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Rockwell Automation Publication 20C-PM001F-EN-P - March 2012 101
Application Notes Appendix B
Start At Power Up
A powerup delay time of up to 30 seconds can be programmed through [Powerup
Delay], parameter 167. After the time expires, the drive will start if all of the start
permissive conditions are met. Before that time, restart is not possible.
Stop Modes
[Powerup Delay]
Time Expired?
Start At PowerUp
Ye s
Powerup Terminated!
Normal Mode
No
No
No
Powerup Start
Is the terminal block Run,
Run Forward or Run Reverse
Input Closed?
Ye s
Ye s
All Start Permissives Met?
1. No fault conditions present.
2. No Type 2 alarm conditions present.
3. The terminal block programmed
enable input is closed.
4. The Stop input (from all sources) is
received.
Mode Description
Coast
This method releases the motor and allows the load to stop by friction.
1. On Stop, the drive output goes immediately to zero (off).
2. No further power is supplied to the motor. The drive has released control.
3. The motor will coast for a time that is dependent on the mechanics of the system (inertia, friction, etc).
Important: When a “Coast” stop is performed, the drive requires that the motor flux be completely
dissipated before a re-start command will take affect. The amount of time it takes for the motor flux to
dissipate depends upon the size of the drive and motor. If a Start command is issued before the motor flux
has completely dissipated, the HIM will continue to display “Stopped” and the drive will start the motor
after the motor flux has completely dissipated.
Coast Time is load dependent
Stop
Command
Time
Output Voltage
Output Current
Motor Speed
- Programming Manual 1
- Important User Information 2
- Summary of Changes 3
- New and Updated 3
- Information 3
- Table of Contents 5
- Appendix B 6
- Application Notes 6
- Appendix C 6
- Who Should Use this Manual 7
- What Is Not in this Manual 7
- Additional Resources 8
- General Precautions 8
- Drive Start-Up 11
- Start-Up the Drive 12
- Running S.M.A.R.T. Start 13
- Running an Assisted Start Up 13
- Chapter 1 Drive Start-Up 14
- Programming and Parameters 15
- How Parameters are 17
- Organized 17
- Inputs & Outputs 18
- Motor Control 18
- Speed Command 18
- Dynamic Control 18
- Communication 19
- Inputs/Outputs 19
- File Group Parameters 19
- Monitor File 20
- Motor Control File 21
- Speed Command File 24
- Dynamic Control File 30
- (1)(2)(3) 33
- Utility File 35
- Communication File 45
- Inputs/Outputs File 49
- Parameter List by Name 56
- Parameter List by Number 58
- Troubleshooting 61
- Drive Status 62
- Faults and Alarms 63
- Manually Clear Faults 63
- Fault and Alarm Descriptions 64
- Fault Subcodes 71
- Subcodes 75
- Clear Alarms 77
- Common Drive Symptoms 77
- Motor Operation is Unstable 78
- Technical Support Options 79
- HIM Overview 81
- LCD Display Elements 82
- ALT Functions 82
- Figure 2 - HIM Menu Structure 83
- View and Edit Parameters 85
- Remove and Install the HIM 86
- Motor Control Technology 88
- Trip Time (Sec) 89
- Frequency 91
- Vector Control Option 93
- (currently not available for 93
- PowerFlex 700H drives) 93
- PI Enable 94
- Normalized Feedback 95
- Reverse Speed Limit 96
- Skip Frequency 97
- Sleep Wake Mode 99
- Appendix B Application Notes 100
- Start At Power Up 101
- Stop Modes 101
- (A)(C)(B) 102
- History of Changes 103
- Appendix C History of Changes 106
- Numerics 107
- Rockwell Automation Support 116
- Documentation Feedback 116
Relacionado con productos y manuales para Equipo Rockwell-automation 20C PowerFlex 700H Drives Programming
Equipo Rockwell-automation 20D PowerFlex 700 Installation Instructions - Fram Manual de usuario
(76 paginas)
(76 paginas)
Equipo Rockwell-automation 20L PowerFlex 700L Liquid-Cooled Adjustable Freque Manual de usuario
(156 paginas)
(156 paginas)
Equipo Rockwell-automation 140G-K-TLAx_TLCx_MTLx Cu/CuAl Terminal Lug Install Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 42D Series 5000 Blue Line with Analog Output Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 20P PowerFlex DC Drive - Frame D Discharge Resisto Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 42JT_JS VisiSight Competitive Replacement Kit Inst Manual de usuario
(2 paginas)
(2 paginas)
Equipo Rockwell-automation 20D-DL2-LEBO DriveLogix5730 Logix Expansion Board Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 20-COMM-D DeviceNet Adapter Series B FRN 2.xxx Manual de usuario
(246 paginas)
(246 paginas)
Equipo Rockwell-automation 42DBS-5100 Background Suppression with Timing PHOT Manual de usuario
(4 paginas)
(4 paginas)
Equipo Rockwell-automation 20L PowerFlex 700L Frame 2 Common Mode Choke Kit Manual de usuario
(4 paginas)
(4 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.065 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales