Rockwell-automation 2705 RediPanel Push Button Module Manual de usuario descargar pdf (Pagina 11)

Chapter 1

Overview

1–4

RediPANEL 800T/800H Modules support Bulletin 800T and 800H 30mm

120 VAC, Class 1, Div. 2 Groups A, B, C, and D devices only. The 800T

devices have a NEMA Type 12/13 rating for applications requiring

protection from oil and dust. The stainless steel faceplate of 800H devices is

designed for NEMA Type 4, 4X applications (hosedown or corrosive

environments).

RediPANEL 800T/H modules are available in 3 configurations:

• standard

• custom

• unpopulated

Standard Configuration

Standard configurations support 16 or 32 illuminated 800T/H push buttons.

Custom Configuration

Custom configurations support any 16 or 32 of the following 800T or 800H

devices:

• Momentary push buttons, illuminated/non-illuminated

• Push/Pull push buttons, illuminated/non-illuminated

• Flush head, extended head or mushroom head operators

• Pilot lights

• 2 position selector switches, illuminated/non-illuminated

• 3 position selector switches, illuminated/non-illuminated

• 4 position selector switches

• Hole closing plugs

3 or 4 position devices use 2 RediPANEL inputs (and 2 connector cables),

leaving a physical location with an output bit only. You can either:

1. Reduce the total number of push button devices by one for each 3 or 4

position device. Use a hole plug (Catalog No. 800T-N1B) to cover the

unused hole.

For example, a 16 button module that includes a 3 or 4 position device

can have a maximum of 14 additional push buttons.

2. Use a pilot light adapter cable (Catalog 800T-N309) to install a 3 or 4

position pilot light instead of the hole plug.

The above example would then support an additional pilot light for a total

of 16 devices.

800T/H (30mm)

Push Button Modules

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

Sin comentarios

Rockwell-automation 2705 RediPanel Push Button Module Manual de usuario Pagina 11