Rockwell-automation 2705 RediPanel Push Button Module Manual de usuario descargar pdf (Pagina 32)

Chapter 3

Wiring and Installation

3–9

Figure 3.2

Depth Dimensions in Inches (mm)

800A and Sealed Modules

6.88

(174.75) Max.

.44 (11.18)

Max Height of Buttons

.31

(7.87)

.12 (3.05)

Max Thickness

2. Drill 4 (or 6) 0.312” (7.92mm) diameter holes for the top and bottom

mounting brackets.

3. Slide the Module through the opening. The mounting tabs help seat the

Module against an 1/16” (1.6mm) to 1/8” (3.2mm) thick enclosure.

4. To complete the mechanical installation, apply the mounting brackets and

tighten all the captive knurled thumbscrews. Figure 3.3 shows the

location of these screws. NOTE: Your unit may not have a mounting

bracket and thumbscrews. In that case, tighten the #10-32 nuts that are

provided to complete the installation.

Figure 3.3

Mounting Bracket Thumbscrews

Thumbscrews

Mounting Bracket

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 99 100

Sin comentarios

Rockwell-automation 2705 RediPanel Push Button Module Manual de usuario Pagina 32