Rockwell-automation 2755-DM9, -DM9E High Speed Decoder Manual de usuario descargar pdf (Pagina 35)

Chapter 4

Configuring Your Decoder

4–8

-- SYMBOLOGY -- -------- LENGTHS -------- -------- SCANNER CONTROL --------

CODE 39: Yes 00 00 00 00 00 00 00 00 LASER-ON MODE: Continuous

I 2-OF-5: No 00 00 00 00 00 00 00 00 DECODE TRIGGER: Package Detect

CODE 128: No 00 00 00 00 00 00 00 00 CAPTURE COUNT: 2 (scans)

CODABAR: No 00 00 00 00 00 00 00 00 FIELDS/SCAN: 1

UPC-A: No FIELDS/PACKAGE: 1

UPC-E: No NO-READ TIMER: 0000 (msec)

EAN-8: No INTER-SCAN TIMER: 0000 (msec)

EAN-13: No MATCH COMPLETE: 1

---------MATCH CODE TABLE-------------- ----------- OUTPUTS [DISABLED]--------

1) CODE 39 N None 0000

2) CODE 39 N None 0000

3) CODE 39 N None 0000

4) CODE 39 N None 0000

5) CODE 39 N None 0000

6) CODE 39 N None 0000

7) CODE 39 N None 0000

8) CODE 39 N None 0000

_______________________________________

Commands: ESC Change: SPACE Cursor Control: ARROWS

_______________________________________

Note: The two setup screens display the current operating parameters of the

decoder. Any changes made to the configuration will become effective

immediately with the exception of the host communication parameters. In

order for changes to the host port baud rate, stop bits, parity, host protocol, or

device address to take effect, you must save the changes to the decoder’s

EEPROM (SAVE command) and then restart. You can restart the decoder by

pressing the [5] key (Restart System) at the Select Operation menu, through a

host command, or by turning the power off and then back on.

In the following sections of this chapter we will provide a description of all

the options available on the two setup screens. We will also provide a

step-by-step programming example.

4) Reset Status and Counters- Pressing the [4] key at the operations menu

will reset the package counter, no-read counter, and output counters. Prior to

resetting the counters, the decoder will display a confirmation prompt:

RESET STATUS AND COUNTERS . . . Confirm (Y/N)

Press the [Y] key to confirm the reset. Pressing the [N] key will cancel the

reset function.

5) Restart System- Pressing the [5] key at the select operation menu will

reboot the decoder. This has the same effect as turning the power off and

then back on. Prior to restarting the system, the decoder will display a

confirmation prompt:

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 166 167

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 2755-DM9, -DM9E High Speed Decoder Manual de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 2755-DM9, -DM9E High Speed Decoder