Rockwell-automation 4100 AEC Absolute Encoder Converter Installation Manual de usuario descargar pdf (Pagina 12)

Publication 4100-UM052B-EN-P - October 2001

Preface 4

Terminology

In order to avoid confusion, we have used the following general terms

in a specific manner within this manual. We define them as follows:

Transducer - the SSI device is considered a transducer for the

purposes of this manual.

Encoder - Refers to the AEC connector that goes to the 1394 GMC

System or the S Class Compact motion controller. The cable from the

controller attaches to the AEC at the Encoder connector.

For specific definitions of other terms used in industrial automation,

see the Allen-Bradley Industrial Automation Glossary (publication

number AG-7.1).

Common Techniques Used

in this Manual

The following conventions are used throughout this manual:

•

Bulleted lists such as this one provide information, not

procedural steps.

•

Numbered lists provide sequential steps or hierarchical

information.

•

Words that you type or select appear in bold.

•

When we refer you to another location, the section name

appears in italics.

ATTENTION

The exclamation point inside of a triangle, followed

by the word “ATTENTION” indicate circumstances

that can lead to personal injury, death, property

damage or economic loss.

IMPORTANT

Identifies information that is critical for successful

application and understanding of the product.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 60 61

Sin comentarios

Rockwell-automation 4100 AEC Absolute Encoder Converter Installation Manual de usuario Pagina 12