Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manual de usuario Pagina 129

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 128
SA3100 Local Tunable Variables
C-7
P1HZ_E3! Point 1 Frequency
This value is set to select the frequency at
point 1 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz
1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
P2HZ_E3! Point 2 Frequency
This value is set to select the frequency at
point 2 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz
1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
P3HZ_E3! Point 3 Frequency
This value is set to select the frequency at
point 3 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz
1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
P4HZ_E3! Point 4 Frequency
This value is set to select the frequency at
point 4 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz
1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
P5HZ_E3! Point 5 Frequency
This value is set to select the frequency at
point 5 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz
1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
P6HZ_E3! Point 6 Frequency
This value is set to select the frequency at
point 6 in the V/Hz characteristic curve.
This value is entered in hertz times 1000, e.g.,
60 hertz is entered as 60000.
Units: Hz 1000
Default Value: 0
Low Limit: 0
High Limit: 660000
Step: 1
Vista de pagina 128
1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 161 162

Comentarios a estos manuales

Sin comentarios