Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manual de usuario descargar pdf (Pagina 79)

Configuring the UDC Module’s Registers

3-41

Power Device Status Register (Continued) 204/1204

Inverter Power Device Fault Bit 6

The Inverter Power Device Fault bit is set if

the gate driver turns off an output power

device (IGBT) to protect it from an

overcurrent.

Bit 3 in register 202 will also be set.

Hex Value: 0040H

Sug. Var. Name: IPMA@

Access: Read only

UDC Error Code: N/A

LED: N/A

If an output short circuit occurs, a high current will flow in the IGBT causing its

collector-to-emitter voltage to increase to a level much higher than normal. The

gate driver detects this condition and instantly shuts off the IGBT to prevent its

destruction.

Bit 7

Reserved for future use.

Hex Value: 0080H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

Bit 8

Reserved for future use.

Hex Value: 0100H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

Bit 12

Reserved for future use.

Hex Value: 1000H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

Bit 13

Reserved for future use.

Hex Value: 2000H

Sug. Var. Name:

Access: Read only

UDC Error Code: N/A

LED: N/A

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 161 162

Comentarios a estos manuales

Sin comentarios

Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manual de usuario Pagina 79

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation SA3100 Distributed Power System Drv Config,Program