Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manual de usuario descargar pdf (Pagina 95)

Configuring the UDC Module’s Registers

3-57

Meter Port 1

UDC Module Meter Port 1 Register Number Register 1002

UDC register number (0 - 2044) to be mapped to meter port 1. Sug. Var. Name: N/A

Units: N/A

Range: N/A

Access: Read/Write

UDC Module Meter Port 1 Bit Number Register 1003

Bit number of the UDC register specified in register 1002 that is to be

mapped to port 1. Enter a value of 100 (bit 00) to 115 (bit 15) as

required. Enter a value of zero if all of the register’s bits are to be

displayed.

Sug. Var. Name: N/A

Units: N/A

Range: N/A

Access: Read/Write

UDC Module Meter Port 1 Maximum Value Register 1004

Set this register to the number that will represent +10V. The

maximum allowable value is 32767.

Sug. Var. Name: N/A

Units: N/A

Range: N/A

Access: Read/Write

UDC Module Meter Port 1 Minimum Value Register 1005

Set this register equal to the number that will represent -10V. The

minimum allowable value is -32768.

Sug. Var. Name: N/A

Units: N/A

Range: N/A

Access: Read/Write

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 161 162

Sin comentarios

Rockwell-automation SA3100 Distributed Power System Drv Config,Program Manual de usuario Pagina 95