Rockwell-automation T8160 Trusted TMR Interface Manual de usuario descargar pdf (Pagina 62)

Trusted

TMR Module T8160

Issue 13 May 13 PD-T8160 62

4.40. I/O Complex Equipment ‘DX7484’

Description: T7484 Simplex Monitored Guarded Digital Output Module, 110V ac. The Monitored

Guarded Output Module provides switching of 90V ac to 130V ac power to 16 field

outputs. The outputs are arranged in two groups of 8 outputs, where each group is

powered from a common power source. This board definition is for a dual module

configuration.

Product Description reference: PD-T7033 Monitored Guarded Output Modules

OEM PARAMETERS

OEM parameter Valid numbers Description

TICS_CHASSIS

TICS_SLOT

1 – 10

1 – 8 (Chassis 1)

1 – 12 (Expander

Chassis)

The TICS chassis & slot number where the TMR Interface

module is placed

REGENT_CHASSIS

REGENT_SLOT

1 – 16

1 – 10

The chassis & slot number within the Regent+Plus I/O

where the first Module is placed.

PARTNER_CHASSIS

PARTNER_SLOT

1 – 16

1 – 10

The chassis & slot number within the Regent+Plus I/O

where the second Module is placed

MONITER_MASK 1 = mask fault LEDs

0 = enable fault LEDs

First module fault LED mask. Entered as a 16 bit word.

Bit 0 will mask channel 1,bit 15 will mask channel 16. This

field will mask the implementation of the fault LEDs on the

module. Input status is not affected.

FREQUENCY 0 – 1 Frequency of the module.

0 – 60Hz, 1 - 50Hz.

CONFIGURATION

PHYSICAL MODULE:

RACK 1: 16 BOOLEAN outputs States to be written to the two modules identified by the OEM parameters.

Channel 1 is module channel 1 and Channel 16 is module channel 16.

TRUE - channel high, FALSE - channel low

RACK 2: 16 BOOLEAN inputs Inputs reflecting the channel status of first module of the two modules

specified. Channel 1 is the state of module channel 1, Channel 16 is the

state of module channel 16.

FALSE - channel ok, TRUE – channel fault

RACK 3: 16 BOOLEAN inputs Inputs reflecting the channel status of second module of the two modules

specified. Channel 1 is the state of module channel 1, Channel 16 is the

state of module channel 16.

FALSE – channel ok, TRUE – channel fault

RACK 4: 2 BOOLEAN inputs Inputs reflecting the board of the two modules specified. Channel 1 is the

state of the first module, Channel 2 is the state of the second.

FALSE - board ok, TRUE – board fault

Notes:

1. All parameters must be supplied, even for virtual boards.

2. Trusted

chassis and slot numbers start at 1, Regent+Plus I/O chassis and slot numbers

start at 1.

EXTRA INFORMATION

Writing to a channel of board 1 will cause physical writes to be made to both boards as identified by the

parameters associated with the board. Both boards must be managed by the same TMR Interface.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 79 80

Comentarios a estos manuales

Sin comentarios

Rockwell-automation T8160 Trusted TMR Interface Manual de usuario Pagina 62

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation T8160 Trusted TMR Interface