Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Manual de usuario Pagina 12

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 11
12Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
12 What is the Configurable Flowmeter Module?
Using a ControlLogix
CFM Module
ControlLogix CFM modules mount in a ControlLogix chassis and use a
Removable Terminal Block (RTB) or a Bulletin 1492 Interface Module cable
that connects to an IFM to connect all field-side wiring.
Before you install and use your module you should have already:
installed and grounded a 1756 chassis and power supply. To install these
products, refer to the ControlLogix Chassis and Power Supplies
Installation Instructions, publication 1756-IN005
.
ordered and received an RTB or IFM and its components for your
application.
Module Features
The following are some of the features available on the ControlLogix CFM
module that allow greater system applicability.
2 Configurable Flowmetering channels
Flowmeter inputs
Gate inputs
2 current-sourcing outputs
Removal and insertion under power
CE marked
UL listed
CSA certified for Class I Division 2 hazardous locations
For a complete listing and detailed explanation of all the features available on
the ControlLogix CFM module, see Configurable Flowmeter Module Features
and Operational Modes on page 25.
IMPORTANT
RTBs and IFMs are not included with your module.
Vista de pagina 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 167 168

Comentarios a estos manuales

Sin comentarios