Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Manual de usuario descargar pdf (Pagina 92)

92Rockwell Automation Publication 1756-UM010B-EN-P - December 2011

92 Configuring the Configurable Flowmeter Module

Enter Message Configuration

After creating a new tag, you must enter message configuration.

Enter message configuration on the following screens:

 Configuration Pop-Up Screen

 Communications Pop-Up Screen

 Tag Pop-Up Screen

A description of the purpose and set-up of each screen follows.

Configuration Pop-Up Screen

This screen provides information on what module service to perform and

where to perform it.

For example, the screen below shows the information needed to send a

configuration message (module service) to a 1756-CFM module (where to

perform service).

This table contains information that must be entered on the configuration

screen to perform the example CFM module service:

Click here to see the message

configuration pop-up screens

Message Type is CIP Generic

Service Code is 4c

Class Name is 4

Instance Name is 16

Source is Local:1:C

Num. Of Elements

is 300

Field Select

Service Code 4c

Class Name 4

Instance Name 16

Source Local:1:C (dependent on module location)

Number of Elements 300

Destination N/A

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 167 168

Sin comentarios

Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Manual de usuario Pagina 92