Rockwell-automation 1756-CFM ControlLogix Configurable Flowmeter Modul Manual de usuario Pagina 131

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 130
131Rockwell Automation Publication 1756-UM010B-EN-P - December 2011
Software Configuration Tags 131
I.Status[1].FillState Decimal SINT Displays current state of module for channel 1. The
following states are possible:
0 = Filler not active
1 = Filler Enabled only, waiting for start
2 = Timed Trickle Flow complete, not filled
3 = Full Flow for Fill function
4 = Timed Trickle Flow for Fill function
5 = Engineering units for Full Flow
6 = Engineering units for Trickle Flow
7 = Fill complete
I.Status[1].ConsumerErrorCode Decimal INT See page 120
I.Status[1].TotalCounts Decimal DINT Displays actual pulses counted by the counter
connected to the channel 1
I.Status[1].FreqAverage Float REAL Displays frequency averaged over the Meter samples
on channel 1
I.Status[1].FreqPeriod Float REAL Displays frequency using sample time on channel 1
I.Status[1].Speed Float REAL Displays frequency using filter resolution on channel 1
I.Status[1].Acceleration Float REAL Displays acceleration on channel 1 as calculated by
using AccelCalculation samples
I.Status[1].FillTotal Float REAL Fill total in engineering units
I.Status[1].GrossVolume Float REAL Total Counts during each Sample/K-factor x Meter
Factor as occurs on channel 1
I.Status[1].NetVolume Float REAL Total Counts during each Sample/K-factor x
MeterFactor x CCF) as occurs on channel 1
I.Status[1].GrossRate Float REAL Total Counts in Meter Sample/ (K-factor x Sample
Interval) x Meter Factor as occurs on channel 1
I.Status[1].NetRate Float REAL Total Counts in Meter Sample/ (K-factor x Sample
Interval) x Meter Factor x CCF as occurs on channel 1
I.Status[1].ProverTotal Float REAL Displays total counts received on channel 1 in prover
operation.
Total resets when the ProverEnable feature is enabled.
This value operates concurrently with NetVolume, and
must be saved if subtracted from the NetVolume for
single and multiple prover verifications.
I.CSTTimestamp[0] Decimal DINT
I.CSTTimestamp[1] Decimal DINT
Table 14 - Configurable Flowmeter Module Input Tags
Name Style Data type Definition
Vista de pagina 130
1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 167 168

Comentarios a estos manuales

Sin comentarios