Rockwell-automation 2706-ND1 DL40 OFFLINE PROGRAMMING SFTWR.USER MANUA Manual de usuario descargar pdf (Pagina 74)

Chapter 5

The Develop Menu

5–29

Note: When used with [CTRL][X] (ASCII Input Data), the underscore

prompt for this data will still be displayed on the DL40 message display even

when Hide message on display is active.

Select Yes to activate or No to deactivate.

Acknowledge message

Enabling this attribute will instruct the DL40 message display to hold the

message until you press the [MSG ACK] button on the front of the DL40

display. The next message will be displayed only after the [MSG ACK]

button has been pushed.

Note: We recommend that you enable message queueing (from the Options

menu) when using Acknowledge message attribute.

Select Yes to activate or No to deactivate.

Slave message color

This attribute allows you to control the color of a message sent to a

color-capable slave display such as the Dataliner DL50 Tri-Color Marquee

Display. The setting options available to you include:

For DL10 or DL20 For red DL50 For color DL50

Default Default Default

Red

Green

Amber

Important: The factory setting for this attribute in the Message Attribute

Defaults menu is Default. We recommend leaving that value

unchanged. Do not use any selection other than Default for

DL10, DL20, or Red DL50 slave displays.

Note: This attribute is not available from the DL40 message display onboard

editor. It is only accessible through the Offline Programming Software.

Slave message length

Use the Slave message length attribute only with DL50 slave displays. Its

purpose is to allow display of 10-character messages on “short” DL50

displays operating in large text mode. Large text mode displays characters

that are 4.8 in. (12.2 cm) tall. Applicable displays include Catalog No.

2706-F11J (Red DL50 Message Display) and 2706-F11JC (Tri–color capable

DL50 Message Display).

Acceptable values for this attribute include:

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 138 139

Sin comentarios

Rockwell-automation 2706-ND1 DL40 OFFLINE PROGRAMMING SFTWR.USER MANUA Manual de usuario Pagina 74