Rockwell-automation 2711P PanelView Plus Terminal User Manual Manual de usuario descargar pdf (Pagina 162)

162 Publication 2711P-UM001J-EN-P - November 2009

Chapter 6 Install and Replace Components

Remove the Product ID

Label

You can remove the label on your terminal and attach your own label.

1. Remove the Allen-Bradley label using your fingers or a tweezers.

2. Clean area with damp cloth and isopropyl alcohol.

3. Remove adhesive backing of OEM label and affix over area

where label was located.

Replace the Keypad Legend

Inserts

This section shows how to replace the legend inserts in the keypad

terminals. The legend strips are available as separate catalog numbers

for each keypad terminal, except for the PanelView Plus 400 terminal,

which does not support replaceable legend strips. One side of the

legend strips have the default key legends and the other side is blank

for creating custom legends.

PanelView Plus 600 Terminal

The legend inserts for function keys F1 through F10 are accessible

from the back on the unit and can be replaced with the terminal

mounted in the enclosure.

Follow these steps to replace the F1 through F10 function key

legends.

1. From the rear of the unit, pull the legend strips out from the

slots on the lower side of the terminal.

2. Slide the new insert into the same slot until only the end tab is

visible.

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 245 246

Sin comentarios

Rockwell-automation 2711P PanelView Plus Terminal User Manual Manual de usuario Pagina 162