Rockwell-automation 2711P PanelView Plus Terminal User Manual Manual de usuario Pagina 50

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 246
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 49
50 Publication 2711P-UM001J-EN-P - November 2009
Chapter 3 Power Connections
Follow these steps to remove the terminal block.
1. Loosen the two screws that secure the terminal block.
2. Gently pull the terminal block away from the connector.
Follow these steps to install the terminal block.
1. Reattach the terminal block to the connector until seated.
2. Tighten the two screws that secure the terminal block to the
connector.
3-position AC or DC
Terminal Block
2-position DC Terminal
Block (Series E or later)
Vista de pagina 49
1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 245 246

Comentarios a estos manuales

Sin comentarios