Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario descargar pdf (Pagina 178)

10-2 Diagnostics

Clear Fault You may clear a fault using the following methods:

• Remotely via network communications

• A remote reset will be attempted upon detection of a rising edge

(0 to 1 transition) of the “Fault Reset” bit in the various I/O

assemblies. A remote reset will also be attempted upon detection

of the rising edge of the “Fault Reset” parameter.

• Locally via the “Reset” button on the LED Status indication

keypad.

Fault Codes Table 10.1 provides a complete reference of the Fault LED

indications for Bulletin 280 and 281 ArmorStart Distributed Motor

Controllers.

Table 10.1 Fault Indication

Blink Pattern

Fault Types

Bulletin 280/281 Bulletin 284

1 Short Circuit Short Circuit

2 Overload Trip Overload Trip

3 Phase Loss Phase Short

4 Reserved Ground Fault

5 Reserved Stall

6 Control Power Control Power

7 I/O Fault I/O Fault

8 Over Temperature Over Temperature

9 Phase Imbalance Over Current

10 DeviceNet™ Power Loss DeviceNet™ Power Loss

11 Reserved Internal Communications

12 Reserved DC Bus Fault

13 EEPROM Fault EEPROM Fault

14 Hardware Fault Hardware Fault

15 Reserved Restart Retries

16 Reserved Misc. Fault

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 319 320

Sin comentarios

Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario Pagina 178