Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario descargar pdf (Pagina 241)

Bulletin 280/281 CIP Information B-21

Parameter Object — CLASS CODE

0x000F

The following class attributes are supported for the Parameter Object:

Table B.40 Parameter Object Class Attributes

The number of instances of the parameter object will depend upon the

type of Distributed Motor Controller. There is a standard set of

instances reserved (1-99) for all starters. These instances are followed

by a unique set of instances for each starter type (Across the Line,

Soft start, or Inverter type).

The following instance attributes are implemented for all parameter

attributes:

Table B.41 Parameter Object Instance Attributes

Attribute ID Access Rule Name Data Type

1 Get Revision UINT

2 Get Max Instance UINT

8 Get Parameter Class Descriptor WORD

9 Get Configuration Assembly Instance UINT

Attribute ID Access Rule Name Data Type

1 Get/Set Value Specified in Descriptor

2 Get Link Path Size USINT

3 Get Link Path

Array of:

BYTE

EPATH

4 Get Descriptor WORD

5 Get Data Type EPATH

6 Get Data Size USINT

7 Get Parameter Name String SHORT_STRING

8 Get Units String SHORT_STRING

9 Get Help String SHORT_STRING

10 Get Minimum Value Specified in Descriptor

11 Get Maximum Value Specified in Descriptor

12 Get Default Value Specified in Descriptor

13 Get Scaling Multiplier UINT

14 Get Scaling Divisor UINT

15 Get Scaling Base UINT

16 Get Scaling Offset INT

17 Get Multiplier Link UINT

18 Get Divisor Link UINT

19 Get Base Link UINT

20 Get Offset Link UINT

21 Get Decimal Precision USINT

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 319 320

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario Pagina 241

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 284D ArmorStart - Safety Version - User Manual