Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario descargar pdf (Pagina 248)

B-28 Bulletin 280/281 CIP Information

DeviceNet Interface Object -CLASS

CODE 0x00B4

This “vendor specific” object has no class attributes.

A single instance (instance 1) of the DeviceNet Interface Object is

supported:

Table B.56 DeviceNet Interface Object Instance Attribute

The following common services are implemented for the DeviceNet

Interface Object:

Table B.57 DeviceNet Interface Object Common Services

Attribute ID Access Rule Name Data Type Min/Max Default Description

7 Get/Set Prod Assy Word 0 USINT 0…108 1 Defines Word 0 of Assy 120

8 Get/Set Prod Assy Word 1 USINT 0…108 5 Defines Word 1 of Assy 120

9 Get/Set Prod Assy Word 2 USINT 0…108 6 Defines Word 2 of Assy 120

10 Get/Set Prod Assy Word 3 USINT 0…108 7 Defines Word 3 of Assy 120

13 Get/Set Starter COS Mask WORD 0…0xFFFF 0xFFFF Change of state mask for starter bits

15 Get/Set Autobaud Enable BOOL 0…1 1 1= enabled; 0 = disabled

16 Get/Set Consumed Assy USINT 0…185 160 3, 121, 160, 162, 182, 187

17 Get/Set Produced Assy USINT 100…187 161 52, 121, 161, 163, 181-187,189,190

19 Get/Set Set To Defaults BOOL 0…1 0 0=No action; 1=Reset

23 Get I/O Produced Size USINT 0…8 — Size of I/O Produced Data in Bytes

24 Get I/O Consumed Size USINT 0…3 — Size of I/O Consumed Data in Bytes

30 Get DNet Voltage UINT xx.xx — DeviceNet Voltage xx.xx Volts

50 Get/Set PNB COS Mask WORD 0 to 0x00FF 0 Change of state mask for PNBs

Service Code

Implemented for:

Service Name

Class Instance

0x0E No Yes Get_Attribute_Single

0x10 No Yes Set_Attribute_Single

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 319 320

Sin comentarios

Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual de usuario Pagina 248