Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario descargar pdf (Pagina 31)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 31

Chapter 3

Operation

Chapter Objectives

This chapter provides information on the following topics:

• Operating Guidelines

• Start the Computer

• Restart the Computer

• Shut Down the Computer

Operating Guidelines

Follow these operating guidelines for your computer:

• Operator access is limited to the front of the computer, which includes the

display and the touchscreen (if available).

• When mounted in an enclosure, keep the enclosure door closed during

operation so dust and other airborne contamination do not infiltrate the

computer. Open the door only for routine maintenance.

• Do not operate the computer with the covers removed. Removing the

covers disrupts air flow and results in overheating.

• Always use the proper power down procedures as required by your

operating system, such as the Shut Down command in the Microsoft

Windows operating system.

• After shutting down the computer, do not apply power again until

shutdown is complete.

For computers with a HDD, the HDD must come to a complete stop,

which can take up to 30 seconds after shutdown is initiated.

ATTENTION: Access to components behind the panel where the

computer is installed and the front USB port (if available) is restricted to

authorized and properly trained personnel.

SHOCK HAZARD: Do not operate the computer with the covers

removed. An electrical shock hazard exists. All covers, including the slot

covers, are required to maintain EMI shield.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Sin comentarios

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 31