Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario descargar pdf (Pagina 44)

44 Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014

Chapter 4 Component Replacement

3. Remove the four screws that secure the power adapter assembly (A).

4. Remove the power adapter assembly from the chassis (B).

5. Remove the four screws that secure the drive assembly (C).

Lift the bottom end of the drive metal frame about 45

from the chassis (D).

7. Remove the four screws that secure the drive (E).

8. Slide the default drive out of its metal frame (F).

9. Hold the new drive by its edge and remove it from its protective

packaging.

10. Slide the new drive into its metal frame and make sure it’s properly engaged

to the power and data cables (G).

11. Secure the drive to its frame with four screws (H).

12. Lay the bottom end of the drive metal frame on the chassis (I).

13. Secure the drive assembly with the four screws (J).

TIP

Refer to Figure 12 on page 45 for the corresponding letters in parentheses in

steps 5 though 13.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Sin comentarios

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 44