Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario descargar pdf (Pagina 43)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 43

Component Replacement Chapter 4

Hold the new drive by its edge and remove it from its protective packaging.

10. Align the new drive on the carrier (F).

11. Connect the power and data cables to the drive (G).

12. Secure the new drive to the carrier with the four screws (E).

Torque the screws to 0.452 N•m (4 lb•in).

13. Use the extended carrier lever to slide the assembly into the drive bay (H).

14. Retract the carrier lever (I) and tighten its screw to lock in place (J).

15. Secure the drive assembly with the one screw (K).

16. Follow the steps for Post-configuration

on page 37.

Replace a Standard Computer Drive

The drive (HDD or SSD) in standard computers is under the power adapter

assembly.

Follow these steps to replace the drive.

1. Follow the steps for Pre-configuration

on page 36.

2. Disconnect the DC barrel connector from the power input jack.

See page 29

for more information on the DC barrel connection.

Extended

Carrier Lever

Extended

Carrier Lever

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Sin comentarios

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 43