Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario descargar pdf (Pagina 60)

60 Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014

Chapter 5 System Troubleshooting

8. Return the jumper block to its default position.

9. Reinstall the rear cover as detailed in Reinstall the Rear Cover on page 35

10. Follow the steps for Post-configuration on page 33

11. During POST, press F2 to access the BIOS set-up utility and reconfigure

settings.

Ship or Transport the

Computer

If you need to ship the computer via common carrier or otherwise transport it to

another location for servicing or any other reason, you must first uninstall the

computer and place it in its original packing material.

IMPORTANT

The jumper block must be returned to its default position over pins 1

and 2. The computer will not start if you leave the jumper block over

pins 2 and 3.

IMPORTANT

When you clear the CMOS, all BIOS settings return to their defaults.

BIOS settings other than default must be reconfigured after clearing

the CMOS.

ATTENTION:

Do not ship or transport the computer when it is installed in a

machine, panel, or rack. Doing so can damage the computer. You must uninstall

the computer and place it in its original packing material before shipping. Rockwell

Automation is not responsible for damage incurred to a computer that is shipped or

transported while installed in a machine, panel, or rack.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 75 76

Sin comentarios

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 60