Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 76
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 47
Component Replacement Chapter 4
3. Remove the screw that secures the slot cover (A).
4. Pull out the slot cover (B) and store it.
5. Remove the add-in card from its protective packaging.
6. Slide the add-in card into a compatible riser-board slot (C).
Press to make sure it is firmly seated in the slot.
7. Secure the add-in card with the screw (D).
8. Connect any necessary cables to the add-in card.
9. Refer to any installation instructions that came with the add-in card to
verify that all installation steps are followed.
10. Reinstall the computer cover as detailed in Reinstall the Cover
on page 38.
11. Follow the steps for Post-configuration
on page 37.
ATTENTION:
Do not discard the slot cover. If the add-in card is removed in
the future, the slot cover must be reinstalled to maintain proper cooling.
B
A
D
C
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Comentarios a estos manuales

Sin comentarios