Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario descargar pdf (Pagina 53)

Rockwell Automation Publication 6181P-UM002D-EN-P - February 2014 53

Component Replacement Chapter 4

4. Disengage the battery latch (A) from the battery.

5. Remove the old battery from its socket (B).

6. Insert the new battery, with the positive polarity (+ side) facing the latch,

in the socket, making sure the battery is seated completely (C).

7. Engage the battery latch (D).

8. Reinstall the computer cover as detailed in Reinstall the Cover

on page 38.

9. Follow the steps for Post-configuration

on page 37.

10. During POST, press F2 on an attached keyboard to enter the BIOS setup

and reconfigure settings.

IMPORTANT

Do not over-bend the battery latch when replacing the RTC battery.

The latch must retain contact with the battery for proper operation.

IMPORTANT

Replacing the battery results in all BIOS settings returning to their

default settings. BIOS settings other than default must be reconfigured

after replacing the battery.

This computer contains a sealed lithium battery that may need to be

replaced during the life of the computer.

At the end of its life, the battery contained in this computer should be

collected separately from any unsorted municipal waste.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

Sin comentarios

Rockwell-automation 6181F_P Series E Integrated Display Computers User Manual de usuario Pagina 53