Rockwell-automation AutoMax ControlNet Communication Interface Module Manual de usuario Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
Page 22 AutoMax ControlNet Module
Publication number DSMBCN-UM001B-EN-P February 2003
Quick Start
The following steps describe the procedure for using the MBCN as a
scanner. The sections that follow describe the procedures and registers
in more detail.
Step Description Refer to
page:
Step 1. Use RSNetWorx to create a configuration that
contains the I/O devices the MBCN is to scan
and the scheduled produced and consumed
connections for the MBCN.
24
Step 2. Download the configuration to the MBCN. 32
Step 3. Check the NAM state for online. 60
Step 4. Put the MBCN in run mode. 32
Step 5. Verify you can read input data and set output
data, check connection status, and so on.
32,35
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Comentarios a estos manuales

Sin comentarios