Rockwell-automation AutoMax ControlNet Communication Interface Module Manual de usuario descargar pdf (Pagina 55)

AutoMax ControlNet Module Page 55

Publication number DSMBCN-UM001B-EN-P February 2003

Basic Command Set Commands

Command Function Description

02 N/A Protected Bit Write

00 N/A Protected Write

05 N/A Unprotected Bit Write

01 N/A Unprotected Read

08 N/A Unprotected Write

Figure 16 Unsolicited Basic Command Set Commands

The commands shown write directly to or read directly from file N7 on

the module. The address field is used as an offset into the file. If the

address does not exist, the module returns an error.

Unprotected writes are processed in the same manner as Protected writes.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 79 80

Sin comentarios

Rockwell-automation AutoMax ControlNet Communication Interface Module Manual de usuario Pagina 55