Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario descargar pdf (Pagina 21)

Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012 21

Chapter

Create DeviceNet Network Software Files

In this chapter, you complete the following tasks:

• Register an EDS file in RSNetWorx for DeviceNet software

• Set the DeviceNet scanner module’s node address

• Create a DeviceNet configuration file

• Associate a DeviceNet configuration file with an RSLogix 5000 project

• Create a DeviceNet scanlist

Before You Begin

Before you begin, you must complete these tasks:

• These tasks described in Before Using This Publication on page 5:

– Prepare the Logix5000 control system hardware

– Prepare the computer

– Configure the network

– Create an RSLogix 5000 project

IMPORTANT

Multiple Logix5000 control systems can use PowerFlex 40 drives over a DeviceNet network. For example purposes,

this quick start describes the use of PowerFlex 40 drives over a DeviceNet network in a CompactLogix 5370 L3

control system.

If you have already completed the steps in this chapter before using this quick start, skip to Chapter 3, Use a

PowerFlex 40 Drive in an RSLogix 5000 Project on page 39.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 53 54

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario Pagina 21