Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario descargar pdf (Pagina 40)

40 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012

Chapter 3 Use a PowerFlex 40 Drive in an RSLogix 5000 Project

Before You Begin

Before you begin, you must complete these tasks:

• These tasks described in Before Using This Publication on page 5:

– Prepare the Logix5000 control system hardware

– Prepare the computer

– Configure the network

– Create an RSLogix 5000 project

• These tasks described in Chapter 1, Prepare the PowerFlex 40 Drive Hardware on page 13:

– Mount the Drive

– Wire Power to the Drive

– Set the Drive Operation, Node Address, and Communication Rate

– Connect the DeviceNet Adapter to the Drive

– Connect the Drive to the DeviceNet Network

• These tasks described in Chapter 2, Create DeviceNet Network Software Files on page 21:

– Set the 1769-SDN Scanner Module’s Node Address

– Create a DeviceNet Configuration File

– Create a DeviceNet Scanlist

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario Pagina 40